U-verse remote controls can be used to control a variety of devices.
Hemera Technologies/PhotoObjects.net/Getty Images
U-verse is an AT&T; service that provides digital TV, broadband Internet access and mobile phone connectivity to customers all across the United States. Those who sign up for AT&T; U-verse's TV service receive a universal remote control that can be used to control standard televisions, HDTVs, DVD players, VCRs, amplifiers and TV/DVD or TV/VCR combos. You must first sync your U-verse remote control with the device you want to control, however.
Step 1
Turn on the device that you want to synchronize with your remote.
Step 2
Aim the U-verse remote at the device, and press and hold the mode button -- TV, DVD, AUX, for example -- corresponding to device you want to assign it to.
Step 3
Press the OK button while holding down the mode button, and then simultaneously release them both.
Step 4
Wait for all the mode buttons to flash twice, and then enter the values 9, 2 and 2 using the number keypad in under 10 seconds. The previously chosen mode key will flash.
Step 5
Press the PLAY key and then press the FF key repeatedly until the device turns off to synchronize the remote with a television or a DVD player. Press the PLAY key and then press a number key to synchronize the remote with a VCR (1), receiver (2), amplifier (3) or home theater system (4).
Step 6
Press the OK button to save the settings.
Step 7
Press the device's associated mode button, and then press the power button. If the device doesn't power on, then refer to the remote's manual.
Find Phone Service Provider deals in your area:
privacy & security protectedReferences
- "ATT" Official Website: AT&T; U-verse TV Features Guide
Photo Credits
- Hemera Technologies/PhotoObjects.net/Getty Images
